{"id":5218,"date":"2016-07-29T13:47:05","date_gmt":"2016-07-29T08:47:05","guid":{"rendered":"http:\/\/www.cawater-info.net\/all_about_water\/en\/?p=5218"},"modified":"2016-07-28T15:47:52","modified_gmt":"2016-07-28T10:47:52","slug":"graphene-based-sheets-make-dirty-water-drinkable-simply-and-cheaply","status":"publish","type":"post","link":"http:\/\/www.cawater-info.net\/all_about_water\/en\/?p=5218","title":{"rendered":"Graphene-based sheets make dirty water drinkable simply and cheaply"},"content":{"rendered":"

Engineers at the Washington University in St. Louis (WUSTL) have developed graphene-based biofoam sheets that can be laid on dirty or salty dams and ponds to produce clean drinking water, using the power of the sun. This new technique could be a cheap and simple way to help provide fresh water in countries where large areas of water are contaminated with suspended particles of dirt and other floating matter.<\/em><\/p>\n

\"graphene-biofoam-1\"<\/a>

A new system of bi-layered biofoam may provide the means to purify vast bodies of water simply by overlaying them with sheets of this new material<\/p><\/div>\n

The biofilm is created as a two-layered structure consisting of two nanocellulose layers produced by bacteria. The lower layer contains pristine cellulose, while the top layer also contains graphene oxide, which absorbs sunlight and produces heat. The system works by drawing up water from underneath like a sponge where it then evaporates in the topmost layer, leaving behind any suspended particulates or salts. Fresh water then condenses on the top, where it can be drawn off and used.<\/p>\n

“The process is extremely simple,” said Srikanth Singamaneni, associate professor of mechanical engineering and materials at WUSTL. “The beauty is that the nanoscale cellulose fiber network produced by bacteria has excellent ability to move the water from the bulk to the evaporative surface while minimizing the heat coming down, and the entire thing is produced in one shot.”
\nWhilst this is a novel use of graphene, the researchers claim that the process used to make their bi-layered biofoam is actually the most innovative part of the whole experiment. Analogous to the process an oyster uses to create a pearl, where a small kernel of material is continually overlaid with layers of a fluid coating that eventually hardens, the bacteria used in the new material produces layers of nanocellulose fibers peppered with particles of graphene oxide flakes.<\/p>\n

“While we are culturing the bacteria for the cellulose, we added the graphene oxide flakes into the medium itself,” said Qisheng Jiang, a graduate student at WUSTL. “The graphene oxide becomes embedded as the bacteria produces the cellulose. At a certain point along the process, we stop, remove the medium with the graphene oxide and reintroduce fresh medium. That produces the next layer of our foam. The interface is very strong; mechanically, it is quite robust.”<\/p>\n

The researchers also claim that the material is exceptionally light, cheap to make, and can easily be produced in vast quantities. And, unlike even exceptionally simple systems designed to do similar things, the graphene biofoam material is simply laid over a body of water and does not require systems of pipes or energy to run the water through for decontamination.<\/p>\n

“Cellulose can be produced on a massive scale,” said Singamaneni. “And graphene oxide is extremely cheap \u2014 people can produce tons, truly tons, of it. Both materials going into this are highly scalable. So one can imagine making huge sheets of the biofoam.”<\/p>\n

The production system used to create the biofoam also has the ability to include other nanostructure materials that destroy bacteria and clean the water more thoroughly, allowing it to produce safe drinking water from almost any source.
\n“We hope that for countries where there is ample sunlight, such as India, you’ll be able to take some dirty water, evaporate it using our material, and collect fresh water,” said Singamaneni.<\/p>\n

The results of this research were recently published in the journal Advanced Materials.<\/p>\n

Source: Washington University in St.Louis<\/a><\/p>\n

Dear User\/Visitor! Please, answer on our questions: tick off one of the positions – your answer will make us able to improve our site and make it more interesting and useful!<\/strong><\/em><\/p>\n

\n\t
\n\t\t

<\/p>\n\t\t

<\/p>\n\t\t

What materials need to be added on the site?<\/strong><\/p>